Back from a World Tour (2011-2023), “CYRILIC” is a solid and secure aluminum cruising sailboat.
Built by NAUTALU shipyard – architect Philippe Subrero.
Ready to set off again, in good condition and well-maintained and equipped during its long journey in the Caribbean Arc, the Pacific, the Indian Ocean, and the Red Sea.
Stored dry every year for 8 to 9 months/year, deck redone in 2024 by a professional.
Visible at Port Maritima – Martigues.
Yanmar 3Y30MC engine from 2011 – 30 hp diesel (3960h) with Sail drive SD20 transmission.
Engine mounts and sail drive seal replaced in 2020.
3-blade propeller, average consumption 2.7l/h at 5.5 knots and 2700 rpm.
Access through cockpit hatch and starboard side.
240l aluminum fuel tank.
Layout:
6 to 8 sleeping places – 2 rear double cabins 2mx1.25m with fan.
At the front, 1 Breton bed 190m x 1.70m.
Large U-shaped saloon for 8 people with fans, 2 built-in benches with a berth for 1 person.
Chart table, large eagle, and navigator seat with fan on starboard.
U-shaped kitchen with stove, oven, refrigerator; 2 sinks to port.
Lavac WC with electric macerator Jabsco and black water tank.
Toilet with sink, possibility of shower.
Aluminum water tank 2 x 200l (400l).
Electrical Equipment:
3 service batteries 110ah (2023) and one engine battery (2024), 220v charger and charge distributor.
3 SOLAR PANELS 2 X60W + 1X80W ADJUSTABLE 3D with regulators.
60A alternator, 12v and 220v sockets, 220v circuit for shore connection, 12/220V converters 1000W AND 150W.
Interior LED and incandescent lighting, LED anchorage lights.
Electronics:
Depth sounder ST60 + tridata (2007), Wind vane/anemometer ST60 (2009), Navtex Nasa Marine, AIS transceiver GME AIST (2016), AIS Nasa Engine 3 (2009), EPIRB beacon with GPS (serviced in 2021), Simrad TP 32 autopilot for tiller, Icom BLU.
Furuno 1623 radar (2006) serviced in 2024.
Sails & Rigging:
Main sail Rolly Tasker 27m2 battened for roller boom 12/2016, Genoa Rolly Tasker 44m2 with draft compensation for furler 12/2016.
Storm jib for detachable forestay with second block on track, Storm sail for detachable forestay, snap hook attachments to be serviced.
Shrouds, forestay, and backstay replaced in 2016, Profurl boom furler 2005 with 4 battens, rigid low clew Profurl.
Genoa furler Profurl (2000) serviced in 2024.
2 tracks for genoa and storm jib with 2 blocks each, detachable forestay 2 positions, 2 spi poles, 8 Spinlock clutches, sheets, halyards, mooring lines, and boom brake.
6 Winches (2 Winchard 42, 2 Winchard 16, 1 Winchard 30, 1 Harken 32).
Miscellaneous:
Dinghy 2.40m with rigid bottom on rear gantry + Yamaha 4hp 4T outboard (2011) serviced in 2022 with launching hoist.
Swim platform with ladder, bimini and cockpit cover, tiller, shower, and cockpit table, CD and USB car radio with internal speakers, sturdy aluminum gantry with adjustable 3D solar panels, fenders, vacuum cleaner.
Electric windlass Tigres 1200w serviced in 2023 with foot switches.
Spade anchor 20kg 44m of chain 10 + 30m of rope.
Light aluminum anchor with 10 chain and weighted rope.
Safety:
Survival Arimar to be serviced, life jackets, 2 bilge pumps, 1 manual external bilge pump, beacon, 3 fire extinguishers to be serviced…
Warm interior with varnished teak woodwork.
Complete refurbishment of the deck by a professional in 2024.
